Hydrochloric Acid
$13.46 – $98.20
Sceney's products are...
LOW ODOUR
SELF-PRIMING ON MOST SURFACES
AUSTRALIAN MADE AND OWNEDProduct details
- Description
- Contains
- Safety Directions
- First Aid
- Packaging
- Instructions
- Symbols (GHS)
Hydrochloric Acid is a bleaching and etching agent for porous surfaces such as concrete, masonry, and bricks. It can be used as aprimer on surfaces and also cleans rust from steel being an extremely corrosive cleaner.
Contains33% Hydrochloric Acid WW
Avoid any contact with Skin and Eyes. Be aware of fuming vapours, use only in well-ventilated areas. Always wear appropriate PPE and read SDS before use
If poisoning occurs, contact a Doctor or the Poisons Information Center 13 11 26(Australia) immediately, If swallowed do not induce vomiting, give a glass of water
Concrete Etching can be done with various dilutions of Hydrochloric Acid depending on the age of the concrete/masonry and degree of etch required. A deep etch for mortar/concrete spatter removal may be performed with one-part Hydrochloric Acid diluted with two parts water. A moderate etch for old concrete with 1:10 dilution or1:20 is used to provide a very mild etch and for new concrete apply solution diluted to surface, broom out to spread evenly on surface. Allow approximately for 1 litre of diluted acid per square metre of surface. Allow to react or until bubbling ceases, then rinse with water to leave clean etched surface. Brick Cleaning is performed with a strong one part hydrochloric to two parts water solution or even neat Hydrochloric Acid if required
